Editing the Hand for the figure pose.

The hand figure setup is edited in the hand panel. This should only be used for editing the initial figure pose of your Automatron Bot. It?s best to do the hand editing last.


Edit Hand

By pressing this button you will see the interface has added length parameters to each joint and also there is now a position offset for the root of each finger. The hand will be edited symmetrically if you have the 'Sync' button checked in the Hand Panel. Use the rotation spinners to set the rotations of the joints for the figure pose. Uncheck the 'Edit Hand' button when you are done with your hand figure poses.


When you have completed your figure pose, press the Save button and save the BotScaler settings. You can load these settings on any Automatron Bot.